SP60 -A industrial injection pump
Technical Specifications | |
Accuracy | ≤1.0 % (syringe ≥1 mL) |
Precision | CV≤0.05% at full stroke (with syringe ≥ 500 uL ) |
Wetted material | Borosilicate glass,PTFE,PFA,CTFE,ETFE,UHMW-PE |
Dimension (L x W x H) | 142.69mm*44.4mm*127mm |
Power supply | DC 24V,1.5A (peak) |
Syringe and Drive | |
Syringe fitting | 1/4″-28 thread |
Syringe | 50uL, 100uL, 250uL, 500uL, 1mL, 2.5mL, 5mL |
Syringe material | Borosilicate glass,stainless steel plunger with PTFE coating, PTFE or UHMW-PE plunger tip |
Resolution (standard mode) | 3000 steps with 0.01mm in 1 step |
Travel | 30mm |
Time for full stroke | 1.26s-1200s |
Drive system | Ball screw drive |
Valve & Valve Drive | |
Turn Time | ≤250ms between adjacent ports |
Valve options | Standard: 3-port valve; optional: 3-port distribution valve, 4-port valve, T-valve, through valve or valve free |
Max pressure | 0.68MPA |
Fitting | 1/4″-28 thread |
Communication | |
Interface | RS485, RS232, external control input and output |
Protocol | Data terminal,OEM protocol (serial) |
Baud rate | 9600bps or 38400bps |
Format | Data bit: 8; parity: none; stop bit: 1; half duplex (RS232/485) |
Firmware | |
Topology group | Up to 15 pumps in one group, support group control and individually addressed |
Homing Algorithm | Plunger home position is identified by motor stall, which will reduce the dead volume of the system |
Halt function | "h " command is used to halt execution of the command string during plunger movement. To resume execution with "R" or "r" command |
Programmable parameter | Programmable ramps, cut-off velocity, plunger speeds, backlash compensation,programmable work-flow command set , delays and loops, terminate moves, diagnostics, absolute and relative positions |
Environmental | |
Operating temperature | Recommended: 15℃-40℃ ,use low temperature syringe for low temperature application |
Operating Humidity | <80% RH, no condensation |
Storage temperature | -20℃-65℃ |
Storage Humidity | <80% RH, no condensation |